About This

• ✔️COVER LARGE GAPS (8–17 cm / 3–6.7 in) – Designed to cover larger gaps than most standard gap fillers (non-foldable). Helps prevent items from falling into gaps around refrigerators, countertops, desks, vanities, consoles, balconies, and other narrow spaces. Please measure the gap length and width to match your installation area. Made of durable metal with an upgraded baked-paint coating that resists heat, water, stains, and daily wear.
• ✔️TWO INSTALLATION METHODS – No-drill mounting pads work on hard, smooth surfaces such as tile, glass, metal, marble, or finished wood. For drywall, plaster walls, wood walls, concrete, or uneven surfaces, drilling with expansion anchors and screws is required for a secure installation.
• ✔️SURFACE PREPARATION – Clean and dry the mounting surface before installation to remove oil and dust for the best adhesion. When using adhesive pads, please carefully follow installation steps 4–7 and firmly press the pad to remove trapped air bubbles, ensuring a strong and long-lasting bond. Once applied, the adhesive pad is designed for secure installation and is not intended for frequent repositioning.
• ✔️ADHESIVE INSTALLATION TIPS – For narrow gaps where removing the metal plate after installation is difficult, we recommend installing and positioning the adhesive pads first, then allowing them to bond for 24 hours before attaching the metal plate. Alternatively, temporarily install the product upside down to access the screw section more easily. Proper installation helps maximize adhesive strength and durability.
• ✔️IF ADHESIVE PADS FALL OFF – If the adhesive pad loses adhesion on smooth surfaces, strong double-sided tape under 5 cm (2 in) in width can be used as a replacement. Choose the length according to your product size (e.g., 50 cm / 19.7 in or 60 cm / 23.6 in). One roll is usually sufficient.
• ✔️STOVETOP USE NOTICE – This product was not specifically designed or tested for stovetop use. If installing near a stove, please review the stovetop instructions in the product images and make sure the surface is clean and free of oil before installation.
• ✔️ACCESSORY NOTICE – Some packages include full mounting hardware. Included accessories are as shown in the main product image. Standard anchors (#6 1-1/5" or #8 1-3/5") and adhesive pads are widely available if needed.
• ✔️For REMOVAL- gently peel off the adhesive pad from suitable smooth surfaces. With proper removal, compatible smooth surfaces can be restored clean and bright without leaving adhesive residue. For rough, uneven surfaces, or applications that significantly exceed the adhesive pad’s recommended load capacity, expansion screws are